Product Details
This dust detector sensor utilizes the principle of optical illumination, through the conversion of optical path and circuit, to measure the dust concentration within the detection range, and can directly use the single-chip microcomputer for UART communication. The air quality sensor and its detection system developed by LUFTMY have many advantages such as low power consumption, small size, high sensitivity, high precision, good selectivity, wide measurement range, intelligence and integration.
LUFTMY's GDS-07 sensor has a wide range of applications. In addition to indoor and outdoor air quality solutions, it also expands its environmental sensor solutions, such as monitoring rooms, clean rooms, etc.
Product advantages and performance
Electromagnetic shielding, anti-fouling, anti-interference -
Detection accuracy 0.3-10μm -
Small size, low power consumption, short response time -
Good detection stability and consistency -
PWM, IIC, UART output -
More than 8 years lifespan when powered on -
Specification
Detection principle |
Principle of Infrared Light Scattering |
Detection particle size range |
0.3~10μm |
PM2.5 output consistency |
＞100ug/m³ Maximum allowable error±15% |
＜100ug/m³ Maximum allowable error±15ug/m³ |
PM2.5 output range |
0~500 |
Working conditions |
-10~65℃, 0~95%RH |
Storage conditions |
-20~80℃, 0~95%（Non condensing） |
Operating Voltage |
DC 5V ±0.2V（power ripple 50mV Max） |
Working curren |
≤20mA |
Standby current |
≤0.1mA |
Output mode |
PWM、UART |
Mean time to failure（MTTF） |
≥3year |
Receiving board size |
W61.5*H35*D19（mm） |
The GDS-07 dust detector sensor that has passed ISO9001 and TS16949 quality certification marks a new round of technological breakthroughs in the field of laser PM sensors. Its measurement principle is based on the principle of optical illumination, which enables accurate measurement and has a service life of more than eight years.
PM2.5 refers to particulate matter with a diameter of no more than 2.5 microns, which is a dangerous and harmful substance. Due to their small size, particles can penetrate deep into the lungs, which over time can lead to lung diseases such as bronchitis or asthma, as well as heart circulatory problems.
With LUFTMY's PM2.5 sensor, manufacturers of air quality monitoring equipment can provide innovative devices for monitoring air quality that can avoid long-term health damage caused by air pollution. GDS06 has been recognized and praised by a large number of customers.
Application areas: household/central air conditioners, fresh air systems, air purifiers, range hoods, car purifiers, dust monitors, smoke alarms, formaldehyde detectors,…
http://www.luftmysensor.com/
Company Profile
